top of page

How to use iSphalt 6.5

iSphalt 6.5 will perform best and achieve maximum longevity if the following installation procedures are followed.

  1. Brush the contour of the area to be repaired with a brush and rinse with water, the debris and water can be left inside the pothole.

  2. Pour iSphalt 6.5 into the pothole directly in the water.

  3. Level with a rake or a shovel.

  4. Pour water on the product.

  5. Compact the product with your boots a hand tamper or a compactor. The product should be left half inch to 1 inch higher than the surrounding hard surface to accommodate secondary compaction resulting from traffic flow. 

  6. Water the repaired area to avoid the material to stick on the tires.

bottom of page